![]() Your question of resolution is maybe best answered with the default extrusion width of the 0,4mm nozzle, which is 0,45mm in Slic3r. There are a couple of things to consider during the process. 4 nozzle on a different brand of printer then a prusa so I can't say what the machines will be able to pull off. I hope that might help some at least for your question as to what the mk3 will be able to I am unsure my stuff was done with a standard. I would most likely suggest giving a little clearance when printing those joints but does not need to be a lot but enough to account for your printer and the material. ![]() 2 layer height and I am sure some of that can be tuned in a way to get closer to spec with some work. So for example do a 20x20x20 cube and you might have one axis come out 19.97 one come out 20.07 and one 19.87 which is actually what my machine spit out today while I was fine tuning it. Welcome to the world of 3d printing, this will be my 2nd machine and I'm looking forward to it while I'm still new to the life of 3d printing I figure ill say that when items print there can be some variation on what a printer puts out.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |